Where can I get brass for a Sharps rifle?

Where can I get brass for a Sharps rifle?

C. Sharps Arms Co. and Dixie Gun Works both sell brass. It may also be produced from 50 basic brass using a file trim die. The 50 caliber Sharps rifles did not have the same choice of ammunition as the 40 and 45 caliber Sharps rifles. There were no standard issue cartridges for it, except for some experimental loads made by the armory itself.

Brass is available for purchase at most gun shops that stock firearms components. Larger quantities can be ordered through bullet makers and powder manufacturers with whom many gunmakers retained contractual agreements to supply them with material needs. These items are not easily found outside of commercial trade channels.

The only way to make a true copy of a Sharps rifle is to build one from scratch. The original parts are in private collections across the country. No two copies will be identical because each builder will use different materials and techniques when constructing their guns. However, they all will function exactly like the original.

There are three main types of brass used in making reproductions. They are jacketed, unjacketed, and swaged. Jacketed brass has a thick outer layer that protects the inner metal from wear and tear during storage and handling. This type of brass is required to fire modern replicas. Unjacketed brass has an internal coating to prevent corrosion but lacks the protective exterior shell.

What kind of ammunition did Sharps rifles use?

In the years following the Civil War, many variants of all three weapons were later adapted for use with.50-70 and.52-70 caliber metallic cartridge ammunition. The New Model 1869 Carbine and Rifle, available in calibers.44-77,.50-70, and.60, were the first Sharps weapons built for use with metallic cartridges. These firearms are considered some of the best value for money in the history of gun making.

Sharps designed his carbines with a modular construction that allowed users to install different types of barrels and stocks according to their own preferences. This resulted in many variations on the basic design of the rifle and carbine being produced by various manufacturers throughout the world.

The majority of Sharps rifles and carbines were manufactured with blued steel components, although some may have had their barrel blued and their furniture oiled for protection from the elements. A few may even have been fitted with walnut or maple stock assemblies.

Sharps originally packaged his rifles with two spare cylinders and a knife blade attached to the end of his belt loop. He also included a small leather pouch containing several sizes of washers for use as spacers in adjusting the sight radius on his rifles.

After the war, many original parts from these guns were recycled and used again in newer models being produced by other manufacturers. For example, the original trigger group from a Sharps rifle was installed in a Winchester model 1866 rifle that sold in large numbers after the war.

Where can I buy 32 Winchester Special brass?

Now comes the 32nd. Winchester Special brass is not commonly available on gun shop shelves. Buckhorn had three boxes of Remington Core-Lokt 170-gr. .32 Specials in stock, and I also bought 200 rounds of Hornady brass. That's all that's left!

The best place to look for special brass would be with a collector who also collects this caliber. You might be able to find some sold by dealers who don't want them anymore, or even come across some during estate sales or similar events.

Winchester Special brass is very difficult to find, but it's possible. The case design is unique so there's no other ammunition like it out there. It's a very small caliber but it's popular with collectors because of its rarity.

What kind of rifle is a Sharps 1874?

"Big 50" and "Sharps 1874" are two examples. 50-70-450, sometimes spelled.50 1 3/4 "calendrical It was created in 1875. This is quite great. Sharp sports rifle in 50 caliber. The 30th "There is a barrel... More information is available by going here. What's New This Week This Week's NewFRONTIER & CIVIL WARAntique Sharps Carbine, Model 1859FRONTIER & CIVIL WARAntique Sharps Carbine, Model 1859FRONTIER & CIVIL WARAn Metallic Cartridges are now available! These cartridges feature a silver bullet that weighs almost a full ounce! There are three types of metallic cartridges:.45 Long Colt/.44 Special/.40 S&W. These will fit standard size revolvers with some modifications to the frame and cylinder walls needed to handle such a heavy bullet. They are not recommended for beginners because they require special handling and care.

The Sharps 1874 is an antique firearm from the late 19th century. They were manufactured by the Sharps Rifle Company in Rockford, Illinois. The company was founded in 1872 by Oliver F. Ritchie after he bought out his partner Thomas A. Jenkins. In 1874, Oliver Ritchie added a second model to his line of rifles, the 1874 Deluxe. Both of these firearms used the same action design as their predecessor, the 1871 Sharps Rifle but they were made from better quality materials and were more accurate. Today, these are considered some of the first true sporting rifles due to their high rate of fire and accuracy.

The Sharps 1874 is a single-shot, breech-loading rifle that uses rimfire ammunition.

What caliber was the original Sharps rifle?

Sharps rifle
Cartridge.52-caliber 475-grain projectile with 50-grain (3.2 g) cartridge, later converted to .50-70 Government in 1867. The Model 1874 rifles and carbines were available in a variety of calibers, including .45-70 Government, .45-110, and .45-120.
ActionFalling block
Rate of fire8–10 shots per minute

What kind of brass do you use for the.264 Magnum?

Brass for the.264 Winchester Magnum is widely obtainable. Previously, the slowest burning rate allowed was 4831, but today, H1000 may be utilized to get the last few fps out of the.264-provided a 26" barrel is used. Manufacturers such as Winchester have used all varieties of brass for this cartridge.

The.264 uses a 175-grain bullet at 3,000 feet per second or faster. This means that heavy bullets are needed to provide sufficient momentum to produce lethal wounds from such a short distance. Since no standardization exists for.264 ammunition, we can only assume that brass weight would be proportional to bullet size. Thus, if you need heavier bullets, go with larger cases, and if you need smaller bullets, use smaller cases.

As long as your brass is not corroded or otherwise damaged, it should function properly when loaded with.264 Winchester Magnum ammo. Corrosion on the inside of the case will cause your bullets to ride up against the wall of the casing, reducing their performance dramatically - so look after your equipment!

Heavy metals like lead and zinc in excess quantities can leach into your brass from two sources: powder and shellac. Powder tends to be more of a concern because its effect is cumulative over time. If you're shooting many rounds without cleaning your gun, then you're going to wear out your bore pretty quickly!

What kind of sights do Ruger Old Army revolvers have?

The Old Army came in satin stainless steel, gloss stainless steel, or blue finishes, with or without fully adjustable target-type sights and a 5.5" or 7.5" barrel. The following is a summary of Ruger's Old Army.45 revolver specifications:

Manufactured by the Sturm, Ruger & Company from 1971 to 1978. Original price was $65.00 - $85.00. Total production was approximately 10,000 guns.

These are large-frame revolvers, designed to be comfortable in the hand of many shooters. They have 13½" barrels and weigh about 5¾ pounds empty. The front sight is an old-style flat blade while the rear is a solid triangular shape. Both are black enameled for durability. Satin stainless steel versions were also produced.

Old Army revolvers use the same basic design as other Ruger single-action revolvers but they use 4140 steel instead of 4214 for their main body. This results in a stronger gun that can handle greater numbers of shots before replacement is necessary. The 4140 frame is hammer forged then hard chrome molybdenum coated for extra strength. The cylinder chambers and grooves are precision machined after assembly.

Each gun comes with one 6-round old army clip.

About Article Author

Edna Wheeler

Edna Wheeler is an environmental journalist that has written about topics such as infrastructure, agriculture and environment. But she has extensive knowledge about food systems, water resources, natural resource management and climate change adaptation. She earned her master's degree in environmental journalism from the University of British Columbia in Canada where she studied with some of the world’s leading experts on sustainable development.

Disclaimer

OnlySlightlyBiased.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Related posts